Classic heating systems are gradually being superseded by more economical types. Increasingly, suburban property is being equipped with floor heating schemes. A large number of owners of houses with wooden floors are willing to acquire alternative heating, which with the introduction of new developments has become possible.
We will talk about how to put a warm floor under linoleum on a wooden floor. In the article presented by us, the options for installing floor heating systems and the technologies for their implementation are discussed in detail. Recommendations are given on laying linoleum on top of the heating circuit.
Why should you choose a warm floor?
The classic use of heating systems implies the presence of radiators that spread their heat when heated, and then maintain the heat in the room. As a rule, batteries are mounted at a certain height in the area of windows or load-bearing walls. The air in the room gradually warms up.
Following the physical laws, warm air masses are rapidly rising. As a result, the upper part of the room becomes warm and the floor becomes cold. Thus, a large amount of energy is spent inefficiently.
The action scheme of heating systems of various types. The advantage of a warm floor is manifested in the uniform distribution of heated air throughout the room
When using the technology of underfloor heating, heated air masses accumulate at the bottom, and slightly chilled - in the upper part, under the ceiling. This option of temperature distribution with a difference of up to 2-4ºС is the most optimal and comfortable for humans.
The most efficient heating system
Often, home owners are thinking about how to choose a heating system. A competent approach in this matter ensures the normal functioning of the project. Today there are two groups.
Option # 1 - water heating circuit
According to a reliable design, the coolant circulates from the pipes. This form of floor organization is characterized by durability and productive heat transfer.
The cost of a water system is lower than an electric system, but there are also disadvantages. For example, the path along the contours of the floor heating reduces the temperature of the coolant, so there is a limit on the length of the lines.
Connecting water floors to central heating is possible only after obtaining special permission, in practice it is unrealistic. For this, it is necessary to change the set of design documents for a residential building
But water floors are quite suitable for heating individual housing, especially for the ground floor. They are connected to the boiler, which creates a truly economical circuit.
The main feature of such a system is that its installation is carried out “wet”, in a high-quality concrete screed. For this, qualified installers maintain the specified height and the rules for the formation of a cement-sand layer on a wooden floor.
It is allowed to put the screed on the subfloor, which will increase the load several times. In addition, it will be necessary to create high-quality waterproofing, which eliminates the ingress of any amount of moisture. Thus, the height of the floor increases from 8 to 12 cm.
Option # 2 - electric heating circuit
A particularly productive and advantageous option is infrared-type film products. The heating elements are carbon-based flexible heaters that have a laminated sheath. In practice, a solid plate is obtained, symmetrically divided into heating sections.
Carbon-based film heaters are used for dry installation. This option is considered the most effective for forming a warm floor with a wooden base.
The advantage of a film type of floor is that it transfers heat to the room evenly. The design lasts a long time and does not require a systematic and expensive service.
Types of quality linoleum
The rational choice of floor coverings is the fundamental basis for the successful implementation of a heated floor project.
The market of building materials is replete with a large number and variety of linoleum. For laying the product on the floor, models with a high heat transfer coefficient are perfect
Finishing material should be selected based on the degree of toxicity of the raw material.
Particular attention should be paid to the composition and safety of the special coating:
- Vinyl. The product is formed on the basis of PVC, which gives it a beautiful design. But with strong heating, the material becomes a source of an unpleasant and pungent odor.
- Relin. The basis for the production of such linoleum is bitumen, synthetic rubber and high-quality rubber. The front layer is problematically undergoing heating, which does not allow its use in living rooms and premises.
- Nitrocellulose (colloxylin). The material has a high level of moisture resistance, but lends itself well to combustion.
- Gliftal (alkyd). The fabric-based flooring does not withstand high temperature conditions, which leads to significant deformations.
- Marmoleum. environmentally friendly material has a high quality workmanship, which gives it refractory and antistatic characteristics.
Professional builders agree that marmole or vinyl linoleum is suitable for the formation of a water warm floor. A more economical option is alkyd modifications with a special film coating.
An important factor is the ability of linoleum to conduct heat. If this indicator is low, then there is no point in using it. Beware of purchasing jute flooring, various felt and PVC foam.
The floor surface under linoleum should be brought out evenly. Otherwise, irregularities will be visible through the thin coating.
Between the film heater and the relatively thin linoleum, it is necessary to place a strong base, for example, plywood. By ignoring this recommendation, you will ensure that all flaws are visible to the naked eye.
Preparing the base of wood
Builders claim that a warm water floor can be laid on an old structure. However, this will require careful preliminary surface preparation. First of all, it is necessary to eliminate cracks and gaps of different sizes. Otherwise, the system will not give the expected work efficiency.
Brief Instruction:
- Grind the old coating.
- We mask cracks and gaps.
- We lay plywood sheets.
- Having fitted the fragments, we fix them on the screws.
The newly formed base must be treated with an antiseptic solution and allowed to dry.
The presence of water floor systems implies the existence of slight differences in height, and for film and rod analogues, the base should be flat
Experienced craftsmen for the construction of a thin but strong base use functional scoring or even coating (plywood, chipboard, etc.). In the second option, you should carefully monitor that the edges of the canvas are tightly fitted together.
Competent installation of electrical devices for STP
Careful preparation of all the necessary materials for construction is an important point. When assembling a floor heating structure, it is necessary to purchase a high-quality film element. The product is laid at a distance of 50 cm from the walls.
It should be remembered that heavy objects in the form of large furniture and household appliances should not be placed above the film. IR heater does not adjust temperature
If large objects on top do not allow heat to pass through, then it gradually returns back to the source. As a result, the conductor may burn out or partially deform. Determining the exact amount of film is carried out based on technology and styling features.
For the continuous operation of the heaters, clip-clamps are necessary that carry out the fastening of the contacts (2 units per separate strip). But first you need to lay the insulation material with a high reflection coefficient, as well as install thermostats, prepare copper wires.
Thermal insulation
Laying the insulating layer does not take much time, but this is a very important stage. The event is mandatory, since heat without a protective barrier will go up and down. As a result, a large amount of energy is spent irrationally.
Implementation of work, as a rule, is carried out through a roll insulator. The product is rolled on a wooden base, while its reflective surface should face up
Each strip is attached to the base with a stapler and double-sided tape. The stripes are joined without any gaps. The joints are carefully glued with tape.
Rules for forming a film floor
The rolling process of the infrared film is carried out above the insulator at a distance of 50 cm from the wall. At the same time, the placement of the copper strip should be clearly below. If necessary, cut the material into equal bands, based on the labeling of the film sections.
The peculiarity of cutting an infrared type film is accuracy. The product is formed into strips of the required size along sectional lines. Thus, you will avoid damage to the heating elements.
Carbon-based heaters must not be damaged. If you find scratches or tears on the product, then such places should be treated with mastic on a bitumen basis. This option is also great for insulating copper electrodes. Joints of materials are securely fastened with special clamps.
The parallel connection diagram has the following sequence:
- the first contact is placed on the surface of the electrode inside a special film. The second contact is carefully applied from above;
- Strong and reliable connection is achieved by tightly pressing the electrode with a clamp using pliers.
After a detailed laying of all the bands of the infrared-type film, a common web is formed by gluing with tape.
The bare ends of the electrical wires are insulated with pliers. The contacts of the thermal film are also subject to insulation, as they are made of silver along the edge and are able to conduct current
High-quality sizing of the fabric around the perimeter prevents slipping.
How to install the thermostat?
Installation of a temperature regulator in each room allows you to operate the floor heating system as efficiently as possible. Separate temperature sensors are glued to strips of IR film using mastic. In addition, each device must be securely fixed to the carbon fiber thermal element.
The output wires of the sensor is carried out to the nearest wall. To avoid irregularities, a groove under the cable is cut out in the heat insulator.
The controller is fixed on the wall in compliance with the rules for connecting electrical wires based on instructions from the manufacturer
In order to increase the efficiency of electrical protection, all devices with a power of more than 2 kW are connected to a separate circuit breaker. Setting the floor temperature to 30 ° C, wait for the film to warm up.
Thus, one can study the state and functioning of the system. If serious flaws are found, they are eliminated.
The last stage includes the installation of insulation - a film of polyethylene type, which reliably closes the underfloor heating system. The product is carefully rolled out on top of the heating elements and fixed with small screws to the base of the tree. Perform this procedure carefully so as not to catch the electrodes.
Secrets of a water-type warm floor
The implementation of installation work in this format of the system is to form a special wooden base with grooves. This is where the pipes will be placed. An alternative is to install them in polystyrene mats, which are tightly covered by heat exchangers.
Complex of preparatory work
As a rule, logs are laid on a wooden base, on which a full floor is subsequently formed. Wooden elements are placed at the same distance of 60 cm and with equal height.
If you ignore these recommendations, the finish surface of linoleum will be skewed. Between the beams under the heater evenly lies a layer of protection against steam, condensate and water.
The use of high-quality and original materials is the key to the successful implementation of the tasks. Therefore, if you use a regular film, the steam will accumulate in the insulation itself and gradually destroy it.
On top of the waterproofing is a wide layer of insulation in the form of mineral wool with a density of 40 kg / m3 or another type of product. At the end, the structure is covered with a special film with high-quality insulating characteristics.
The flooring of the boards should be done so that between the planks an even groove is formed for the installation of a particular pipe. The value of such an opening should clearly correspond to the diameter of the purchased element of the heating system
However, do not forget to leave a small margin. So, for example, for a 16 mm pipe, a groove of 20 * 20 mm is perfect. The end part of the base should have a narrow slit with rounded edges in the form of loops to provide rotation for the heat channel.
Features of the pipe assembly process
There is one important rule at the stage of installing floor heating pipes. A flat foil should be placed on top of each groove of the longitudinal type. All elements should be tightly wrapped with metal “paper” and securely fastened to the board along the edges with a stapler.
After such actions, the floor heating pipe is attached to the floor with special metal-based plates. This prevents the part from slipping out of the groove.
According to this scheme, all pipes are fastened. Pay special attention to ensure that there are no joints in the same circuit.
In order to save, the exact amount of material needed is calculated in advance. At the same time, they adhere to the established limit, in which the contour should not go beyond a certain area. In practice, this leads to a lack of pressure for the normal movement of the coolant and the "locking" of the circuit.
Therefore, for a pipe of 16 mm, the maximum pipe length of 70-80 m is recommended, and for 20 mm - 110 m. If the calculated length is not enough, it is rational to make a breakdown into several circuits.
Communication with the heating system
One of the last stages of the formation of a water-based floor heating system is the connection to the heating unit. This operation can be implemented in several ways.
A common option involves the use of a collector structure with a mixing unit and reliable manual adjustment. However, the technology and connection mechanism are chosen by the owner
After connecting the elements, the process of crimping the pipeline is carried out.The procedure is mandatory, as it minimizes the risks of leaks and swelling of the coating. Preparation of the base for the installation of linoleum or laminate is the laying of plywood sheets.
How should linoleum be laid?
The process of laying polymer material is carried out in several successive stages, namely:
- before laying the product is kept for about 24 hours in the room;
- if necessary, the linoleum is cut into strips and spread on the surface without fixing;
- by turning on the heated floor, let the universal floor cover lie down for another 48 hours;
- fix the material in the most practical and appropriate way.
When choosing linoleum mounting options, adhesive mastic should be preferred. The resin must be of high quality and original (from a reliable manufacturer) so that the heat is distributed evenly over the surface.
It should be remembered that the infrared-type film floor is distinguished by ease of installation, and a competent water structure - by efficiency, reliability and durability.
The following article will familiarize you with the rules and guidelines for installing a warm floor under a laminate on a wooden base, in which all stages of the full cycle of work are examined in steps.
To avoid mistakes when arranging a warm floor, we offer you to watch informative and useful videos.
Features of laying a warm floor on a wooden flooring:
Professional recommendations for installing STP under linoleum:
After analyzing the above information, you can rationally determine which heating suits you. You can carry out the installation yourself, but if you are not sure about your capabilities, just invite professionals. Qualified specialists to carry out high-quality projects of various levels of complexity, while you save personal time.
Do you have experience installing a warm floor in a house with wooden floors? Maybe in your arsenal there are technological subtleties that are useful to site visitors? Please write comments in the block below, ask questions on controversial issues, post a photo on the topic of the article.