When operating heating devices, it is required to control the degree of heating of the coolant, as well as the indoor air. Temperature sensors for heating help to remove and transmit information, information from which can be read visually or immediately sent to the controller.
We offer to understand how temperature sensors work, what types of control devices exist, and what parameters should be considered when choosing a device. In addition, we have prepared step-by-step instructions that will help you independently install the temperature sensor on the heating radiator.
The principle of operation of the thermal sensor
You can control the heating system by a variety of methods, including:
- automatic devices for timely power supply;
- safety monitoring units;
- mixing units.
For the correct operation of all these groups, temperature sensors are needed that give signals about the functioning of the devices. Monitoring the readings of these devices allows you to identify malfunctions in the system in time and take corrective measures.
There are many types of instruments used to take temperature. They can be immersed in coolants, used indoors or located outside
The temperature sensor can be used as a separate device, for example, to control the room temperature, or be an inextricable part of a complex device, for example, a heating boiler.
The basis of such devices used in automated control is the principle of converting temperature indicators into an electrical signal. Due to this, the measurement results can be quickly transmitted over the network in the form of a digital code, which guarantees high speed, sensitivity and accuracy of measurement.
At the same time, various devices for measuring the heating stage can have design features that affect a number of parameters: work in a certain environment, transmission method, visualization method, and others.
Types of temperature measuring devices
Thermal devices can be classified according to a number of important criteria, including the method of transmitting information, the location and installation conditions, as well as the reading algorithm.
By the method of information transfer
According to the method used to transmit information, the sensors are divided into two large categories:
- wire devices;
- wireless sensors.
Initially, all such devices were equipped with wires through which temperature sensors were connected to the control unit, transmitting information to it. Although these devices are now supplanted by wireless counterparts, they are still often used in simple circuits.
In addition, wired sensors are more accurate and reliable.
To ensure the coordinated operation of the wired sensor used in the composite device, it is desirable to combine it with equipment that is made by the same manufacturer
Nowadays, wireless devices, which most often transmit information using a transmitter and a receiver of radio waves, have gained distribution. Such devices can be mounted almost everywhere, including a separate room or open air.
Important characteristics of such temperature sensors are:
- the presence of a battery;
- measurement error;
- signal transmission range.
Wireless / wired devices can completely replace each other, however, there are some features in their operation.
By location and method of placement
At the place of attachment, such devices are divided into the following varieties:
- invoices attached to the heating circuit;
- submersible in contact with the coolant;
- indoor located in a residential or office space;
- external, which are located outside.
In some units, several types of sensors can be used simultaneously for temperature control.
According to the reading mechanism
By the method of demonstrating information, devices can be:
- bimetallic;
- alcohol.
In the first embodiment, it is assumed to use two plates made of different metals, as well as a dial indicator. As the temperature rises, one of the elements deforms, creating pressure on the arrow. The readings of such devices are characterized by good accuracy, but their inertness is a big minus.
Bimetallic and alcohol thermostats are often installed on heating equipment, such as boilers. They allow you to monitor the heating, excess of which can lead to fatal consequences.
Sensors whose operation is based on the use of alcohol are almost completely devoid of this drawback. In this case, an alcohol-containing solution is poured into a hermetically sealed flask, which expands when heated. The design is quite elementary, reliable, but not very convenient for observation.
Different types of temperature sensors
To take temperature readings, devices having a different principle of operation are used. Among the most popular are the devices listed below.
Thermocouples: accurate removal - difficulty in interpreting
Such a device consists of two wires welded together, made of various metals. The temperature difference that arises between the hot and cold ends serves as a source of electric current of 40-60 μV (the indicator depends on the material of the thermocouple).
Most often, the following combinations of metals and alloys are used for the manufacture of thermocouples: chrome-aluminum, iron-costantan, iron-nickel, nickel-chromium and others
A thermocouple is considered a high-precision temperature sensor, however, it is quite difficult to take an accurate reading from it. To do this, you need to know the electromotive force (EMF) using the temperature difference of the device.
In order for the result to be correct, it is important to compensate for the temperature of the cold junction, using, for example, a hardware method in which a second thermocouple is placed in an environment of a predetermined temperature.
The software compensation method involves placing another temperature sensor in the isocamera together with cold junctions, which allows you to control the temperature with a given accuracy.
Certain difficulties are caused by the process of taking data from a thermocouple due to their nonlinearity. For the accuracy of the indications, GOST R 8.585-2001 introduced polynomial coefficients, which allow translating the EMF to temperature, as well as performing inverse operations.
Another problem is that the readings are taken in microvolts, for the conversion of which it is impossible to use widely available digital devices. In order to use a thermocouple in structures, it is necessary to provide accurate, multi-bit converters with a minimum noise level.
Thermistors: easy and simple
It is much easier to measure temperature using thermistors, which are based on the principle of dependence of the resistance of materials on ambient temperature. Such devices, for example, made of platinum, have such important advantages as high accuracy and linearity.
The main problem of such temperature sensors can be considered an extremely low temperature coefficient of resistance, however, it is still easier to accurately measure it than to catch small values of the thermocouple voltage
An important characteristic of a resistor is the base resistance at a certain temperature. According to GOST 21342.7-76, this indicator is measured at 0 ° C. It is recommended that a number of resistance values (Ohms), as well ascop - temperature coefficient.
T indicatorcop calculated by the formula:
Tcop = (Re - R0c) / (Te - T0c) * 1 / R0c,
Where:
- Re- resistance at current temperature;
- R0c - resistance at 0 ° C;
- Te - current temperature;
- T0c - 0 ° C.
The GOST also provides temperature coefficients provided for various measuring devices made of copper, nickel, platinum, and also indicates the polynomial coefficients used to calculate the temperature based on current resistance indicators.
Thermistor sensors are widespread in the electronic and engineering industries, due to the accuracy of readings, sensitivity and undemanding operation
Resistance can be measured by connecting the device to the current source circuit and measuring the differential voltage. Indicators can be controlled using integrated circuits, the analog output of which is equal to the supplied voltage.
Thermal sensors with similar devices can be safely connected to an analog-to-digital converter, digitizing it with an eight or ten-bit ADC.
Digital sensor for simultaneous measurements
Digital temperature sensors have also been widely used, for example, the DS18B20 model, whose operation is carried out using a chip with three outputs. Thanks to this device, it is possible to take temperature readings simultaneously from several sensors operating in parallel, while the error is only 0.5 ° C.
A popular model is the SHT1 combined temperature / humidity sensor, which allows you to measure heat with an accuracy of + 2 °, and humidity with an error of +5. However, the manufacturer himself claims that there are more accurate and economical devices
Among the other advantages of this device can also be noted a wide range of operating temperatures (-55 + 125 ° C). The main drawback is the slow operation: for the most accurate calculations, the device requires at least 750 ms.
Contactless Irometers (Thermal Imagers)
The action of these proximity sensors is based on the fixation of thermal radiation from the bodies. To characterize this phenomenon, the amount of energy released per unit time from a unit surface is used, which is per unit of the wavelength range.
A similar criterion reflecting the intensity of monochromatic radiation is called spectral luminosity.
The following types of pyrometers are available:
- radiation;
- luminance (optical);
- color.
Radiation pyrometers allow measurements within 20-25000 ° C, however, to determine the temperature, it is important to take into account the coefficient of incompleteness of radiation, the actual value of which depends on the physical condition of the body, its chemical composition and other factors.
The main active element of the radiation sensor is a telescope, inside which is a battery consisting of a series circuit of thermocouples. The working ends of these devices are located on a platinum-coated lobe (+)
Brightness (optical) pyrometers Designed to measure temperatures of 500-4000 ° C. They provide high accuracy of measurements, however, they can distort readings due to the possible absorption of radiation from bodies by an intermediate medium through which observations are made.
Color pyrometerswhose actions are based on determining the radiation intensity at two wavelengths - preferably in the red or blue section of the spectrum, are used for measurements in the range of 800 to 0 ° C.
Their main advantage is that the incompleteness of the radiation does not affect the measurement errors. In addition, indicators do not depend on the distance to the object.
Quartz temperature transducers (piezoelectric)
To take temperature readings within -80 + 250 ° C, you can use quartz transducers (piezoelectric elements), the principle of which is based on the frequency dependence of quartz on heating. In this case, the function of the converter is affected by the location of the slice along the crystalline axes.
Piezoelectric (quartz) devices are most often used in research work, since such devices are characterized by an extended measurement range, reliability, high accuracy
Piezoelectric sensors are distinguished by fine sensitivity, high resolution, they are able to work reliably for a long time. Such devices are widely used in the manufacture of digital thermometers and are considered one of the most promising devices for future technologies.
Noise (acoustic) temperature sensors
The functioning of such devices is provided by removing the acoustic potential difference depending on the temperature of the resistor.
Acoustic methods allow you to take temperature readings in confined spaces and environments where direct measurement is not possible. Similar devices are used in medicine, underwater research, as well as in industry
The method of measurement by such sensors is quite simple: it is necessary to compare the noise produced by two similar elements, one of which is at a previously known, and the second at a determined temperature.
Acoustic temperature sensors are suitable for measuring the interval -270 - + 1100 ° C. At the same time, the complexity of the process lies in the too low noise level: the sounds emitted by the amplifier sometimes drown it out.
NQR temperature sensors
The essence of the operation of nuclear quadrupole resonance thermometers is the action of the field gradient, which form the lattice of the crystal and the moment of the nucleus - an indicator caused by the deviation of the charge from the symmetry of the sphere.
As a result of this phenomenon, a procession of nuclei arises: its frequency is dependent on the gradient of the lattice field. The temperature also affects the magnitude of this indicator: its rise causes a drop in the NQR frequency.
The main element of such sensors is an ampoule with a substance that is placed in an inductance winding connected to the generator circuit.
The advantage of the devices is unlimited measurement duration, reliability and stable operation. The disadvantage is the non-linearity of the measurements, which makes it necessary to use the conversion function.
Semiconductors
A category of devices that operates on the basis of changes in the characteristics of the pn junction caused by temperature. The voltage at the transistor is always proportional to the effect of temperature, which makes it easy to calculate this factor.
The advantages of such devices are high data accuracy, low cost, linearity of characteristics over the entire measurement range. The installation of such devices is conveniently done directly on a semiconductor substrate, making them excellent for microelectronics.
Volumetric Temperature Sensors
Such devices are based on the well-known principle of expansion and contraction of substances observed during heating or cooling. Such sensors are quite practical. They can be used to determine temperatures between -60 - + 400 ° С.
For the possibility of visual temperature control, most of the temperature sensors located in the rooms are equipped with displays on which the current values are displayed.
It is important to remember that measurements of liquids with such devices are limited by the boiling and freezing temperatures, and of gases by their transition to a liquid state. The measurement error caused by the influence of the environment for these devices is quite small: it varies between 1-5%.
Selection of temperature sensors
When choosing such devices, factors such as:
- temperature range in which measurements are taken;
- the need and ability to immerse the sensor in an object or environment;
- measurement conditions: to take indicators in an aggressive environment, it is better to prefer a non-contact option or a model placed in a corrosion-resistant housing;
- the life of the device before calibration or replacement - some types of devices (for example, thermistors) quickly fail;
- technical data: resolution, voltage, signal feed rate, error;
- output signal size.
In some cases, the material of the device’s case is also important, and when used in rooms, dimensions and design.
DIY installation guidelines
Such appliances are widely used for various purposes: they are equipped with radiators, heating boilers and other household appliances.
Before starting installation, you should carefully read the instructions: it indicates not only the features of the installation (for example, dimensions for connection to the pipe), but also the operating rules, as well as the temperature limits for which the measuring device is suitable.
It is also necessary to take into account the size of the sleeve, which can vary between 120-160 mm.
Consider the two most common cases of mounting a temperature sensor.
Connecting the device to a radiator
It is not necessary to equip all heating appliances with a thermostat. According to the regulations, the sensors are installed on the battery if its total power exceeds 50% of the heat production by similar systems. If there are two heaters in the room, then the thermostat is installed only on one having a greater power indicator.
The temperature sensor is a mandatory part of temperature controllers, allowing to reduce or increase the heating of radiators, underfloor heating and other heating appliances
The valve of the device is installed on the supply pipe in the place of connecting the radiator to the heating network. If it is impossible to insert it into an existing circuit, it is necessary to dismantle the supply lead, which can cause some difficulties.
To carry out this manipulation, it is necessary to use a tool for cutting pipes, while installing a thermal head is easily done without special equipment. As soon as the sensor is mounted, it is enough to combine the marks made on the case and the device, after which the head is fixed by smooth pressing of the hand.
Mounting an air temperature sensor
Such a device is installed in the coldest living room without drafts (in the hall, kitchen or boiler room its installation is undesirable, as it can cause disturbances in the system).
When choosing a place, you need to make sure that sunlight does not fall on the device, there should not be any heating appliances (heaters, radiators, pipes) nearby.
For a conventional heating system, one thermostat is enough, while with a collector circuit it is desirable to use several sensors, the number of which coincides with the number of rooms. This will allow you to individually adjust the temperature in separate spaces.
Connection of the device is carried out according to the instructions that are in the technical passport, using the terminals or cable that are included in the kit.
If it is necessary to monitor the temperature, the temperature sensor in the “warm floor” can be located in the depth of the concrete screed. In this case, a corrugated pipe having one closed end and a sloping bend can be used for protection.
The latter feature allows you to remove a broken device if necessary and replace it with a new one.
Installation of the device is as follows:
- A recess is arranged in the wall for mounting the attachment.
- The front part is removed from the temperature sensor, after which the device is installed on the prepared site.
- Next, the heating cable is connected to the contacts, while the sensors are connected to the terminals.
The final step is to connect the power cable and install the front panel in its place.
The connection diagram of the thermostat for a heating boiler is described in detail in this article.
If the device, for the functionality of which the internal connection of the sensors is required, has a complex design, it is better to contact specialists.
The video below details how to install thermal appliances on a boiler:
Does the installation of the sensors on the supply and return pipes differ:
Temperature sensors are widely used both in various industries and for domestic purposes. A wide range of such devices, which are based on different operating principles, allows you to choose the best option for solving a particular problem.
In homes and apartments, such devices are most often used to maintain a comfortable temperature in the premises, as well as adjust heating systems - batteries, underfloor heating.
Have something to supplement, or have questions about choosing and installing a temperature sensor? You can leave comments on the publication, participate in discussions and share your own experience using such devices. The contact form is located in the lower block.